Staples One Touch Stapler Refill Driver Into The

This is the Rapid Classic K2 High Capacity Desktop Stapler To load staples, press up on this circular tab, then pull out the loading bar.

Furthermore, how do I staple many pages Put the pages you want to staple together in the stapler.

After it touches the paper, itll push easily about another 18 or so - push it down until you feel resistance, and hold it there with one hand.

One may also ask, how do you refill a heavy duty stapler Electronic Heavy - Duty Staplers Once you have found it, pull the feed tray out with your fingers.

How do you open a handheld stapler To load these staplers, depress the button at the rear of the stapler to eject the staple magazine.

Pull the arm upward to open the hinge that holds it over the carrying tray.

Push the arm back until the tension on the hinge is relieved and the carrying tray is fully exposed.

Grasp it firmly with the top edge of the stapler resting in your palm.

At the opposite end from the stapling end, you will see a metal piece that is curved on both sides.

For back load staplers, push the stapler tray in to close it.

Pull the tray away from the base to gain better access to the jam.

Use a sharp object to push the jammed staple up from the bottom.

Causing the stapler to move or apply pressure at an angle, instead of punching the staple straight into and through the paper, also causes crumpling and jamming.

Staples One Touch Stapler Refill Driver Into The

Insert the flat end of a flat-head screwdriver into the mouth of the stapler if you cant get the top part of the stapler open.

Pour the second batch of jello onto the stapler and chill until set.

Place the bowl of jello into a larger bowl partially full of warm water.

Do this by putting the punch at the tip of the driver, which you should see coming out of the nose.

If you need to fix a stapler the process is usually simple, but in some cases it could be damaged beyond a basic repair.

Turn the stapler upside down, tip out the staples and try again.

If a staple is stuck in the stapler head, use a pair of tweezers to tease it out.